Javascript Menu by
ООО Дюрр Системс РУС

130 TBUR

Assembly Line

All steps in the wheel assembly combined in one machine:
  • Maintenance-friendly design: tires and trims are transferred on the same height
  • Identification and lubrication of tire and rim
  • Plausibility check (incorrect tire and rim combination)
  • Tire lay-on
  • Gentle assembly, especially with low profile tires and runflat tires (RF, DSST)
  • Torque measurement
  • Srecial tools
  • Point-to-point matching as optional
  • Tool set for runflat and DSST tires as option

Range of application

Automatic assembly and inflation of tubeless tires in normal, low profile or super low profile type with steel or aluminum rims of various dimensions in batches or in mixed sequence.

Linking of the line, for example, with a preceding valve-insertion station and a succeeding wheel balancing machine.

Alternatively other assembly and inflation lines for tubed tires or a mixed operation of tubeless/tubed tires are also available.


Multi-station line of modular design with fully automatic operating sequence. The stations, typically including lubrication, laying and assembly station, depending on application, are arranged one after the other in line. An integrated lift-and-carry gear conveyor transports all units fully automatically in a line (length-wise) from station to station. Optimum linking of the line to automated production lines.

Sequence of operations

  • Automatic transfer of the tires one by one into the lubrication station, combined with bead diameter identification
  • Infeed of rims one by one on a belt conveyor. Positioning and detection of the diameter and width for control of the mounting head and plausibility comparison with the tire. After lubrication of both rim edges transfer the rim through a lift-and-turn conveyor to the lay-on station
  • Tire feed from the lubrication station. Guided lay-on of the lubricated tires onto the rim.
  • Fast transfer of the tire and wheel to the mounting station
  • Center and clamp the rim, optimum positioning for gentle mounting of the tire with two independent push and hold-down elements, controlled by hydraulic axes.
  • Automatic adjustment of the mounting head in accordance with the previously determined values. Mounting of the tire by 360° rotation of the mounting head with simultaneous guidance by the pressing elements for gentle mounting of low-profile tires. Separate or simultaneous mounting of the two beads is possible.
  • Further transfer to the optional matching and inflation stations
Дополнительная информация
План установки
1   Rim separator (option) 2   Rim soaping 3   Rim transfer device 4   Tyre separator (option) 5   Tyre soaping 6   Tyre positioning 7   Fitting station 8   Operating panel 9   Hydraulics 10 Switch cabinet Plan view (non-binding example: dimensions of the switch cabinet depend on the relevant application)
Контактное лицо

По техническим вопросам, пожалуйста, обращайтесь к:

ведущему инженеру Дмитрию Райко

+7 (495) 741 0091
+7 (495) 741 0092
Добавить к списку выбранного оборудования

Использование куки -файлов.
Куки(cookie)- файлы позволяют привести наши службы в состояние оптимальной готовности. С помощью нашего сайта и сервисной службы Вы сможете понять и согласиться с тем, почему мы используем куки-файлы.
Ссылка на декларацию о защите данных компании Schenck RoTec